11-8 DICOM/HL7
Name Description
Maximum Retries
Set the maximum retries (0-9). The default value is 3. If the
DICOM task sending to the server fails, the retry times should
be 3.
Interval Time(Sec) Interval time for the system to retry a connection.
Timeout(Sec) Refers to timeout during association establishment.
TLS
Transport Layer Security. Select whether to encrypt the data
during network transportation.
Print
Properties
Copies
See copies of printed files. You can select from 1 to 5, or
directly enter the number.
Settings
The system supports RGB (color printing) and
MONOCHROME2 (black and white printing). Please select the
type the printer supports.
Film Orientation Select from between LANDSCAPE and PORTRAIT.
Priority Specify printing task priority from HIGH, MED and LOW.
Select film size from the selections listed in the drop-down list.
Display Format
Specify the quantity of printed files, e.g., STANDARD\2, 3
indicates 6 images are printed for each page.
Medium Type
Specify print medium: Paper, Clear Film, Blue Film. Select Blue
Film or Clear Film for black and white printing; select Paper for
color printing.
Trim
Specify whether you want a trim box to be printed around each
image on the film: Yes or No.
Configuration Info Enter configuration information in the field.
Min Density Enter the minimum density of the film.
Max Density Enter the maximum density of the film.
Destination
Specify where the file is exposed: MAGAZINE (stored in the
magazine) or PROCESSOR (exposed in the processor).
Magnification Type
Select how the printer magnifies an image to fit the film.
Replicate: interpolated pixels belong to duplicates of adjacent
pixels)
Bilinear: interpolated pixels are generated from bilinear
interpolations between adjacent pixels
Cubic: interpolated pixels are generated from cubic
interpolations between adjacent pixels
None: without interpolation.
TLS
Transport Layer Security. Select whether to encrypt the data
during network transportation.
Add Add the DICOM service to the service list
Cancel Click to cancel parameter preset.
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
Service
Delete Click to delete the selected service from the service list.
To Next Page
Loading...
Need help?
General
