C-6 iWorks (Auto Workflow Protocol)
C.6 Manual Examination
Suspend - Exit the protocol so the user can run the system manually. This is used when an unusual or
atypical workflow is required.
You can run the system manually if necessary.
Start manual examination: touch [Suspend] to pause the current iWorks protocol. The system
enters manual examination status.
Return to iWorks: touch [Resume iWorks] to return to automated status. You can continue the
previous iWorks scan.
C.7 Insert
Insert is a specialized protocol event within iWorks and iWorks OB. It assists with the workflow for
documenting and measuring common pathological (disease) states (i.e. Mass, Cyst, Stenosis,
Thrombus) that occurs outside a routine, normal examination.
1. Touch [Insert] on the touch screen to enter the status.
2. Select the necessary protocol and the system adds the protocol events to the current protocol.
3. Perform measurements or add comments/body marks to the image if necessary.
C.8 iWorks Setting
Enter the iWorks preset screen using the path: “[Setup] → [iWorks].” Here you can customize the
protocols and views:
To Next Page
Loading...
Need help?
General
