Image Optimization 5-65
To Activate iLive
1. Enter 3D/4D image viewing status, or double-click the saved 3D/4D cine file in the iStation or
Review screen.
2. Tap [iLive] on the touch screen to turn the function on, and adjust the parameters.
Imaging using iLive
1. Select the imaging mode:
Use the ordinary probe and press
to enter Smart 3D.
Or, use 4D probe and press
or to enter 4D mode or Static 3D mode.
2. Select the render mode to be iLive by touching the touch screen, and set the related parameters
(quality and angle, etc.).
3. Press <Update> to begin acquisition.
4. The system finishes acquisition and enters the image viewing screen.
In image review status, you can perform operations such as VOI setting, image editing, comment
adding, body mark adding, etc.
5. Or press <B> or
/ to exit the mode.
5.10.12.1 Operation Controls
Adjustable parameters for iLive are on the touch screen.
Shading
Adjusts the effect of shadowing and scattering. When the selected level is 0, the rendered image will be
bright and sharp, and the shadow border will be clear while the area of the shadow will be relatively
To Next Page
Loading...
Need help?
General
