Setup 12-11
1. Add groups: posit the cursor in the field box near [Lists Name], enter the group name through the
keyboard, and then click [Add Group]. Then the entered group will be added to the Group Lists.
2. Rename groups: select a user-defined group, enter the group name through the keyboard, and
then click [Rename]. Then the new group name will be displayed in the group lists.
3. Delete groups: select a user-defined group, click [Delete Group]. After a user-defined group is
deleted, it will not be available.
4. Add comments to groups: the operation is the same to that of the "Comment Configure" tab.
5. Change position of the selected items: the operation is the same to that of the "Comment
Configure" tab.
6. After you customize groups, click [Save] to confirm and exit the screen.
Note: You can rename, delete, add comment to, delete comment from, or change position of the
selected items in the user-defined groups, while system standard groups cannot be modified
12.5 iWorks Preset
For details, see “Appendix C iWorks.”
12.6 Stress Echo Preset
For details, see “5.14.5 Maintenance and Protocol”.
12.7 DICOM/HL7 Preset
For details, see “11.1 DICOM Preset.”
To Next Page
Loading...
