EasyManua.ls Logo

Mindray DC-88 - Barcode Reader; 1-D Barcode Reader

Mindray DC-88
391 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Barcode Reader B-1
Appendix B Barcode Reader
The product supports two kinds of readers for logging data as patient ID: 1-D barcode
reader (SYMBOL LS2208) and 2-D barcode reader (ZEBRA DS4308). The laser
transmitted by the two readers is Class 2 laser. ZEBRA DS4308 is c
lassified as “EXEMPT
RISK GROUP” according to IEC 62471: 2006 and EN 62471: 2008.
WARNING:
Class 2 laser adopts low power, visible LED.
DO NOT stare into beam because of unknown
hazards of transient radiation provided by
class 2 laser.
DO NOT stare into beam emitted by ZEBRA
DS4308 for more than 10s.
CAUTION:
Ensure the information acquired by barcode
reader is consistent with the actual
information.
There are 2 operation modes:
Hand-held mode: press the trigger to decode.
Hands-free mode: seat the reader in the stand to enter the mode, the reader decodes
automatically.
Note: the reader does not support decoding of Multilanguage.
B.1 1-D Barcode Reader
B.1.1 Overview
1. LED Green: A barcode was successfully decoded.
Red: A data transmission error or reader malfunction occurred.

Table of Contents

Other manuals for Mindray DC-88

Related product manuals