Ultrasound Gel Warmer F-1
Appendix F Ultrasound Gel Warmer
Ultrasound gel warmer is a system option used for heating the ultrasound gel.
F.1 Overview
As shown in the figure above, the warmer is installed on the left side of the control panel, where the
ultrasound gel is positioned.
F.2 Structure
No. Name Function
1. Ultrasound gel box Used for positioning the ultrasound gel.
2. Warming control switch Set the gel warmer to the temperature of 37℃/40℃, or turn off.
3. Status indicator
Failure: blink in orange.
4. Power cable Connects to the power socket under the control panel.
To Next Page
Loading...
