Patient Data Management 10-23
4. Click [OK] to exit.
Configuring password policy
Turn on the access control function and log in to the system as Administrator before you configure
the password policy.
1. Open the “Access Control” page using the path: [Setup] → [System] → [Access Control]. Click
[Password Policy Config]:
Parameter Description Remark
Lockout
Threshold
Set the maximum time that a user can input the
wrong password. If you exceed the maximum
times, your account will be locked.
For example, assume
that the "Lockout
Threshold" is set to 5,
the "Reset Account
Lockout Threshold
after" is set to 60, and
the "Lockout Duration"
is set to 60. That is, a
Reset
Account
Lockout
Threshold
after
Set the duration allowed for a user to
continuously input the wrong password.
To Next Page
Loading...
Need help?
General
