Mindray DP-50 Vet - Page 100

5-32 Image Optimization
5.10.3.3 Smart 3D Image Viewing
In VR viewing, the system supports the following functions:
 Render setting.
 B-mode parameter adjustment.
 Setting the display format.
 Viewing MPR.
 Image zooming.
 Rotation.
 Image editing.
 VR parameter adjustment.
 Scanning plane and probe movement
Move the probe across the body surface.
The arrow in the figure below indicates the movement of the probe (you can move the
probe in the opposite direction to the arrow.).
Enter/Exit Image Viewing
 To enter image viewing:
The system enters image viewing when image acquisition is complete.
 Exit
To return to 3D image acquisition preparation status, press <Update> or <Freeze>.
Activate MPR
Select [Current Window] to be [A], [B], [C] or [VR] to activate MPR or 3D image (VR).
MPR Viewing
In the actual display, different colors for the window box and the section line are used to
identify the MPR A, B and C.
 Window A is blue, and the lines (representing MPR A) displayed in the other two
windows are also blue.
 Window B is yellow, and the lines (representing MPR B) displayed in the other two
windows are also yellow.
 Window C is orange, and the lines (representing MPR C) displayed in the other two
windows are also orange.