Mindray DP-50 Vet - Setup and System Configuration; System Preset Configuration

Setup 11-1
11 Setup
The Setup function is designed to set the configuration parameters of operating the system
and maintaining user workflow setup data. The setup data of the user and system are stored
to the hard drive, and should be backed up to CD/DVD or USB memory devices.
CAUTION:
When the setup data is changed, be sure to save the preferences
according to the methods described in this chapter. Mindray is
not responsible for the loss of the setup data.
 To enter Setup:
 Press the <Setup> to enter Setup.
 To exit Setup:
Click [Save] on the Setup menu and the parameter settings is saved.
Click [Cancel] or press <Esc> on the control panel to exit the setup.
If you change the system language and click [Save] on the Setup menu, the system will
automatically restart to make the changing effective.
11.1 System Preset
Click [System Preset] on the Setup menu, you can preset:
Page
Description
Region
To set the hospital name, language, time zone, time format, system
date/time, logo and so on.
General
To set animal information, exam setup, animal management, storage,
system dormancy, operation log and so on.
Image
To set some general parameters in imaging modes.
Application
To set the measure ruler, follicle etc..
Key Config
To assign functions to footswitch and user-defined keys.
Biopsy
To set the needle-guided bracket model and biopsy guide line
relevant parameters.
Admin
To set the user account control relevant information.
11.1.1 Region
Open the Region page via [Setup]-> [System Preset]-> [Region], as shown in the figure
below.