Mindray DP-50 Vet - Image

11-4 Setup
Type
Item
Description
Select Picture
After the screen saver function is enabled, click
[Browse] to select the figure used for the screen saver
and click [Preview] to see the effect.
Exam Setup
Status after exam
ends
Select to enter the imaging scanning, animal info or the
Worklist after ending an exam.
Display
Color temperature
Cold/ Warm
Brightness/Contrast
Load Factory
Load the factory data of the display brightness and
contrast.
11.1.3 Image
Open the Image Preset page via [Setup]-> [System Preset]-> [Image], as shown in the figure
below.
Type
Item
Description
Reset Config
Probe
To set the default probe model for the system.
/
MITI
To set MI TI indexes displayed for current probe/exam
mode.
Freeze
Config
Status after Freeze
To set the system status after the image is frozen.
Image
Cine Memory
To set the cine memory splitting type: Auto, Split.
IP
To set the image parameters