5-28 Image Optimization 
 
  On the soft menu, select [Current Window: X] to activate the target window.   
A, B and C sectional images correspond to the following sections of the 3D image. 
 
  Section A: corresponds to the 2D image in B mode. Section A is the sagittal section . 
  Section B: is the horizontal section. 
  Section C: is the coronal section. 
Tip: the upper part of the 3D image in the 3D window corresponds to the orientation 
mark on the probe. If the posture is head down (toward the mother’s feet), and the 
orientation mark is toward the mother’s head, then the fetus posture is head down in the 
3D image. The 3D image can be rotated by selecting [Quick Rot.: 180°] on the soft 
menu to show the fetus head-up. 
Ultrasound  images  are  provided  for  reference  only,  not  for 
confirming diagnoses. Use caution to avoid misdiagnosis. 
 
  Wire cage 
When viewing a 3D image on the display monitor, it is sometimes difficult to recognize 
the orientation. To help, the system displays a three-dimensional drawing to illustrate the