Trio™ Operating Instructions 0070-10-0666-01 6 - 23
Appendix Physical Specifications
Electromagnetic Compatibility
The Trio meets the requirements of IEC 60601-1-2:2001/EN 60601-1-2:2001.
NOTE: The Trio needs special precautions regarding EMC and needs
to be installed and put into service according to the EMC
information provided below.
NOTE: Portable and mobile RF communications equipment can
affect the Trio. See tables 6-1 through 6-4 that follow.
Drop: Meets the requirements specified by ECRI PB-
296 892 section AIII 3.3 for Class 3
devices.
Impact Meets the requirements specified by ECRI PB-
296 892, section AIII 3.2 for Class 3
devices.
TABLE 6-1
GUIDANCE AND DECLARATION - ELECTROMAGNETIC EMISSIONS
The Trio is intended for use in the electromagnetic environment specified below. The customer or the
user of the Trio should assure that it is used in such an environment.
EMISSIONS
TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1 The Trio uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A The Trio is suitable for use in all establishments other
than domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
Flicker
emissions IEC
61000-3-3
Complies
To Next Page
Loading...
