Mindray Trio - Page 19

Front Panel General Product Description
1 - 4 0070-10-0666-01 Trio™ Operating Instructions
1.1.1 Front Panel Keypad
The front panel keypad is used to access many main functions quickly and easily (see
FIGURE 1-2).
FIGURE 1-2 Keypad
1. POWER Press this key to power the Trio ON or OFF.
NOTE: The power supply and battery
charger are active any time AC
power is supplied, regardless of
whether the monitor is ON or
OFF.
2. BATTERY
CHARGING
INDICATOR
A green LED that is illuminated when AC power is present and
the battery is installed and charging. When the monitor is
running on battery power, this LED does not illuminate. When
a “low battery” condition exists, this LED flashes at a constant
rate.
3. AC POWER
INDICATOR
A green LED that is illuminated when AC power is present.
4. NIBP Press this key to begin a NIBP measurement. During a
measurement, press this key to cancel the measurement and
deflate the cuff.
5. PRINT Press this key to initiate a real-time printout of numeric data
and selected waveforms. Results are output via the optional
internal printer. During a printing, press this key to cancel the
print job. Various print settings (such as speed and duration of
printout) are adjustable and may be set by accessing the
PRINTER SETUP menu in the MONITOR SETUP menu.
(Refer to section 2.3.5.3 for details).
2
3
8
7
6
5
4
1
To Purchase, Visit Avobus.com or call 1-800-674-3655