MINN KOTA RIPTIDE INSTINCT QUEST - Powering the Wireless Remote

18 | minnkota.johnsonoutdoors.com ©2023 Johnson Outdoors Marine Electronics, Inc.
POWERING ON THE WIRELESS REMOTE
Powering on the Wireless Remote
1
a. Power on the trolling motor.
b. To turn on the Wireless Remote (Assembly #B),
press and hold the Power
button on the side of
the Remote.
c. A message will appear on the display screen. Read
the disclaimer, then press the Steer Right
button
to select "I Agree."
d. The content on the display screen will populate.
Remote functions to manually control the motor are
now active, including Speed Up
, Speed Down
, Steer Left , Steer Right , and Prop On/O.
e. When the Advanced GPS Navigation system has
obtained a minimum GPS signal strength of one bar,
all remaining functions will become available.
Power Power
ButtonButton
NOTICE: The Wireless Remote comes from the factory
paired to the Riptide Instinct QUEST.
NOTICE: A Remote Cradle accessory (1866675) can
be purchased for mounting the Wireless Remote or
attaching the Remote to a belt clip.
NOTICE: Attaching the Lanyard (Item #7) to the
Wireless Remote is optional.
ITEM(S) NEEDED
#B x 1
Wireless Wireless
RemoteRemote
#7 x 1