Need help?Do you have a question about the MINN KOTA RIPTIDE INSTINCT QUEST and is the answer not in the manual?
Details the limited warranty for the trolling motor's materials and workmanship.
Outlines conditions and circumstances not covered by the limited warranty.
Provides instructions on how to obtain warranty service and contact Minn Kota.
Lists all parts required for the installation of the Riptide Instinct QUEST trolling motor.
Provides guidance on selecting the optimal location and method for mounting the motor.
Lists the necessary tools and resources for performing the motor installation.
Guidelines for rigging your boat and installing the trolling motor according to safety standards.
Table providing recommended wire gauges and circuit breaker sizes based on motor and wire length.
Guidance on choosing appropriate deep cycle batteries for optimal motor performance.
Instructions for wiring two 12-volt batteries in series to achieve 24-volt power.
Instructions for wiring three 12-volt batteries in series to achieve 36-volt power.
Steps to confirm the trolling motor is receiving power and functioning correctly.
Instructions for installing the MKA-60 Bow-Mount Stabilizer Kit for motor transport.
Identifies key motor components and connected cables, including GPS features.
Discusses communication between Minn Kota and Humminbird fish finders using GPS.
Guidance on connecting and routing Ethernet cables for GPS navigation systems.
Explains using the One-Boat Network app and Wireless Remote for optimal motor performance.
Guides on adjusting the Keel Offset using the Wireless Remote or One-Boat Network App.
Instructions to set the motor's stow orientation using the Wireless Remote.
Instructions to set the motor's stow orientation using the One-Boat Network App.
How to adjust the Boat Scale setting via the Wireless Remote for performance tuning.
How to adjust the Boat Scale setting via the One-Boat Network App for performance tuning.
Guide to customizing the function of the four OBN buttons on the Wireless Remote.
Overview of the motor's mount components and their functions.
Explanation of the Indicator Panel's LEDs and Power Button for motor status.
Step-by-step guide to deploying the motor using the Wireless Remote.
Step-by-step guide to stowing the motor using the Wireless Remote.
Instructions for deploying the motor via the One-Boat Network mobile application.
Instructions for stowing the motor via the One-Boat Network mobile application.
How to adjust the motor's trim depth using the Wireless Remote.
How to adjust the motor's trim depth using the One-Boat Network mobile application.
Procedure for adjusting the Lift Belt tension to maintain proper motor function.
Recommended procedure for greasing motor components for optimal performance.
Instructions for installing an external transducer onto motors with Advanced GPS Navigation.
Procedure to manually stow the motor using the Indicator Panel if remote functions fail.
Detailed steps for manually trimming and stowing the motor in an emergency.
Steps to recover motor functions after performing a manual stow bypass.
Step-by-step guide for safely removing and installing the trolling motor propeller.
Routine cleaning, lubrication, and inspection procedures for the motor.
Common issues, their causes, and solutions for motor operation problems.
Statement regarding the company's commitment to environmental regulations and WEEE directive.
Details regarding the device's compliance with FCC rules for interference.
Exploded view diagram of the trolling motor's control head components.
Detailed list of parts and their corresponding numbers for the control head assembly.
Exploded view diagram of the 24/36 Volt 90/115 Thrust motor components.
Exploded view diagram illustrating the various components of the motor mount.
Information on Minn Kota chargers designed to protect and extend battery life.
Details on the Talon shallow water anchor's features and control options.
Overview of available trolling motor accessories like circuit breakers and mounting brackets.
To Next Page
General
