46 | minnkota.johnsonoutdoors.com ©2023 Johnson Outdoors Marine Electronics, Inc.
DEPLOYING WITH THE OBN APP
STOWING AND DEPLOYING WITH THE ONE-BOAT NETWORK (OBN) APP
a. Open the One-Boat Network (OBN) app on the
mobile device. Make sure the mobile device is paired
with the trolling motor.
b. From the OBN home screen, tap the Motor menu.
The Motor menu opens the Motor home screen.
c. Before the Motor home screen will open, tap Agree
on the on-screen prompt.
1
2
NOTICE: The on-screen prompt will only display once
each time the app is launched. If the prompt has
displayed, the Motor home screen appears after.
d. Tap Trim/Stow on the bottom of the screen to open
the Trim/Stow/Deploy menu.
e. Tap Deploy to automatically deploy the motor.
Normal motor operation will follow.
Deploying with the OBN App
WARNING
As soon as Deploy is tapped, the motor will automatically
deploy. Be sure that the motor is clear from obstructions
and has a clear path of travel. The Prop is disabled while the
motor is stowing or deploying to prevent accidental contact
with the rotating Prop.
NOTICE: While the motor is deploying, it is possible to
stop the action by tapping Pause. To resume, tap the
desired action.
1c1b
NOTICE: To avoid churning or agitation of surface water,
ensure that the top of the motor is submerged at least
12" below the surface of the water.
2d 2e
To Next Page
Loading...
Need help?
General
