Minolta A2 User Manual

(2720)A 11
REPAIR GUIDE
2782-11312782-1131
2782-11312782-1131
2782-1131
2782-11532782-1153
2782-11532782-1153
2782-1153
4. Keep the LCD part opening as shown on the figure, and stick the assy flexible PWB LCD with 2782-1131. 4. Keep the LCD part opening as shown on the figure, and stick the assy flexible PWB LCD with 2782-1131.
4. Keep the LCD part opening as shown on the figure, and stick the assy flexible PWB LCD with 2782-1131. 4. Keep the LCD part opening as shown on the figure, and stick the assy flexible PWB LCD with 2782-1131.
4. Keep the LCD part opening as shown on the figure, and stick the assy flexible PWB LCD with 2782-1131.
Open the LCD part.Open the LCD part.
Open the LCD part.Open the LCD part.
Open the LCD part.
Assy flexible PWB LCDAssy flexible PWB LCD
Assy flexible PWB LCDAssy flexible PWB LCD
Assy flexible PWB LCD
5. Stick 2782-1153 to the part shown on the figure. 5. Stick 2782-1153 to the part shown on the figure.
5. Stick 2782-1153 to the part shown on the figure. 5. Stick 2782-1153 to the part shown on the figure.
5. Stick 2782-1153 to the part shown on the figure.
Assy flexible PWB LCDAssy flexible PWB LCD
Assy flexible PWB LCDAssy flexible PWB LCD
Assy flexible PWB LCD
Fig.3 Assembly of the assy cabi backFig.3 Assembly of the assy cabi back
Fig.3 Assembly of the assy cabi backFig.3 Assembly of the assy cabi back
Fig.3 Assembly of the assy cabi back
Sticking the padSticking the pad
Sticking the padSticking the pad
Sticking the pad
Stick the pad to the part shown on the figure.Stick the pad to the part shown on the figure.
Stick the pad to the part shown on the figure.Stick the pad to the part shown on the figure.
Stick the pad to the part shown on the figure.
Assy holder standAssy holder stand
Assy holder standAssy holder stand
Assy holder stand
PadPad
PadPad
Pad
Fig4. Assembly of the assy cabi back.Fig4. Assembly of the assy cabi back.
Fig4. Assembly of the assy cabi back.Fig4. Assembly of the assy cabi back.
Fig4. Assembly of the assy cabi back.
Installation of the control back unitInstallation of the control back unit
Installation of the control back unitInstallation of the control back unit
Installation of the control back unit
1. Assemble the harness of the compl PWB TB-3 as shown on the figure.1. Assemble the harness of the compl PWB TB-3 as shown on the figure.
1. Assemble the harness of the compl PWB TB-3 as shown on the figure.1. Assemble the harness of the compl PWB TB-3 as shown on the figure.
1. Assemble the harness of the compl PWB TB-3 as shown on the figure.
2. Assemble the harness as shown on the figure and arrange it.2. Assemble the harness as shown on the figure and arrange it.
2. Assemble the harness as shown on the figure and arrange it.2. Assemble the harness as shown on the figure and arrange it.
2. Assemble the harness as shown on the figure and arrange it.
Arrange the harness.Arrange the harness.
Arrange the harness.Arrange the harness.
Arrange the harness.
Arrange the harness in to the space.Arrange the harness in to the space.
Arrange the harness in to the space.Arrange the harness in to the space.
Arrange the harness in to the space.
HarnessHarness
HarnessHarness
Harness
HarnessHarness
HarnessHarness
Harness

Minolta A2 Specifications

General

Sensor Type	CCD
Optical Zoom	7x
Display Size	1.8 inches
ISO Sensitivity	64 - 800
Image Stabilization	No
Max Resolution	3264 x 2448
Image Ratio w:h	4:3
Sensor Size	2/3" (8.8 x 6.6 mm)
Maximum Aperture	F2.8 - F3.5
Storage Types	CompactFlash (Type I or II), Microdrive
Viewfinder	Electronic
Resolution	8 megapixels
Lens Focal Length	28 - 200 mm
Battery	NP-400 Lithium-Ion rechargeable battery
Shutter Speed	30 - 1/4000 sec