Minolta A2 - Page 16

To Next Page

To Previous Page

16 (2720)A

REPAIR GUIDE

12401240

1240

12411241

1241

G G-85G G-85

G G-85

G G-85G G-85

G G-85

12441244

1244

G G-60G G-60

G G-60

90179017

9017

12361236

1236

12371237

1237

Fig.6 Assembly of the stroboFig.6 Assembly of the strobo

Fig.6 Assembly of the strobo

1. Apply G-85 to the directed part (sliding part) of the hinge EVF flash.1. Apply G-85 to the directed part (sliding part) of the hinge EVF flash.

1. Apply G-85 to the directed part (sliding part) of the hinge EVF flash.

2. Apply G-85 to the directed part of 1244.2. Apply G-85 to the directed part of 1244.

2. Apply G-85 to the directed part of 1244.

Hinge EVF flashHinge EVF flash

Hinge EVF flash

3. Apply G-60 to the directed part of 1236 to assemble it as shown on the figure. 3. Apply G-60 to the directed part of 1236 to assemble it as shown on the figure.

3. Apply G-60 to the directed part of 1236 to assemble it as shown on the figure.

4. Assemble it to position SW part of 1244 as the figure, and solder 1244 and the harness.4. Assemble it to position SW part of 1244 as the figure, and solder 1244 and the harness.

4. Assemble it to position SW part of 1244 as the figure, and solder 1244 and the harness.

SolderingSoldering

Soldering

Inside diameterInside diameter

Inside diameter

SW part of 1244SW part of 1244

SW part of 1244

5. Assemble 1240 on the position of the figure. 5. Assemble 1240 on the position of the figure.

5. Assemble 1240 on the position of the figure.

6. Stick 1241 onto the position of the figure to fix it.6. Stick 1241 onto the position of the figure to fix it.

6. Stick 1241 onto the position of the figure to fix it.

Cover bottom stroboCover bottom strobo