Minolta A2 User Manual

(2720)A 19
REPAIR GUIDE
2782-12582782-1258
2782-12582782-1258
2782-1258
2782-12572782-1257
2782-12572782-1257
2782-1257
2782-12612782-1261
2782-12612782-1261
2782-1261
2782-12602782-1260
2782-12602782-1260
2782-1260
2782-1270 (2)2782-1270 (2)
2782-1270 (2)2782-1270 (2)
2782-1270 (2)
GrayGray
GrayGray
Gray
PinkPink
PinkPink
Pink
2782-12712782-1271
2782-12712782-1271
2782-1271
12611261
12611261
1261
Fig.1 Assembly of the cover batteryFig.1 Assembly of the cover battery
Fig.1 Assembly of the cover batteryFig.1 Assembly of the cover battery
Fig.1 Assembly of the cover battery
1. Assemble 2782-1258 under 2782-1257.1. Assemble 2782-1258 under 2782-1257.
1. Assemble 2782-1258 under 2782-1257.1. Assemble 2782-1258 under 2782-1257.
1. Assemble 2782-1258 under 2782-1257.
2. Assemble 2782-1261 as shown on the figure, and insert 2782-1260.2. Assemble 2782-1261 as shown on the figure, and insert 2782-1260.
2. Assemble 2782-1261 as shown on the figure, and insert 2782-1260.2. Assemble 2782-1261 as shown on the figure, and insert 2782-1260.
2. Assemble 2782-1261 as shown on the figure, and insert 2782-1260.
Cover batteryCover battery
Cover batteryCover battery
Cover battery
Cover batteryCover battery
Cover batteryCover battery
Cover battery
Fig.2 Assembly of the holder batteryFig.2 Assembly of the holder battery
Fig.2 Assembly of the holder batteryFig.2 Assembly of the holder battery
Fig.2 Assembly of the holder battery
1. Assemble 2782-1270 as shown on the figure.1. Assemble 2782-1270 as shown on the figure.
1. Assemble 2782-1270 as shown on the figure.1. Assemble 2782-1270 as shown on the figure.
1. Assemble 2782-1270 as shown on the figure.
2. Solder the lead wire in the direction of the figure.2. Solder the lead wire in the direction of the figure.
2. Solder the lead wire in the direction of the figure.2. Solder the lead wire in the direction of the figure.
2. Solder the lead wire in the direction of the figure.
Holder battery BHolder battery B
Holder battery BHolder battery B
Holder battery B
3. Assemble 2782-1271 on the holder battery A as shown on the figure. 3. Assemble 2782-1271 on the holder battery A as shown on the figure.
3. Assemble 2782-1271 on the holder battery A as shown on the figure. 3. Assemble 2782-1271 on the holder battery A as shown on the figure.
3. Assemble 2782-1271 on the holder battery A as shown on the figure.
4. Hook 2782-1261 on the holder battery A as shown on the figure, and assemble the cover battery.4. Hook 2782-1261 on the holder battery A as shown on the figure, and assemble the cover battery.
4. Hook 2782-1261 on the holder battery A as shown on the figure, and assemble the cover battery.4. Hook 2782-1261 on the holder battery A as shown on the figure, and assemble the cover battery.
4. Hook 2782-1261 on the holder battery A as shown on the figure, and assemble the cover battery.
Cover batteryCover battery
Cover batteryCover battery
Cover battery
Holder battery AHolder battery A
Holder battery AHolder battery A
Holder battery A
Holder battery AHolder battery A
Holder battery AHolder battery A
Holder battery A

Minolta A2 Specifications

General

Sensor Type	CCD
Optical Zoom	7x
Display Size	1.8 inches
ISO Sensitivity	64 - 800
Image Stabilization	No
Max Resolution	3264 x 2448
Image Ratio w:h	4:3
Sensor Size	2/3" (8.8 x 6.6 mm)
Maximum Aperture	F2.8 - F3.5
Storage Types	CompactFlash (Type I or II), Microdrive
Viewfinder	Electronic
Resolution	8 megapixels
Lens Focal Length	28 - 200 mm
Battery	NP-400 Lithium-Ion rechargeable battery
Shutter Speed	30 - 1/4000 sec