FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-39
7. Remove the harness in the rear of the Heater
Lamp from the cover.
8. Remove the thermistor harness from the cover.
9. Remove one mounting screw from the front of the
Heater Lamp.
10. Remove one screw and the cover.
NOTE
• When reinstalling the cover, allow two tabs on the
cover to be caught in the frame.
11. Remove one screw and the rear lamp holder.
12. Remove the Fusing Heater Lamp.
To Next Page
Loading...
