45
INSTANT PLAYBACK
QV/delete
button
Off
2 sec
10 sec
Menu setting
Instant playback is disabled.
The captured image will be displayed for two or ten seconds. While dis-
played, the image can be deleted before being saved.
: delete : store
Auto
1
2
3
Press the controller to
delete the image.
• The live image will be displayed
on the monitor.
Use the left/right keys of the
controller to highlight “YES.”
• “NO” will cancel the
operation.
To delete an image during the
instant playback, press the
QV/delete button.
• A confirmation screen will appear.
After an image is captured, it can be displayed on the monitor before being saved. Instant playback is
disabled when used with the continuous-advance or bracketing drive modes (p. 32).
Instant playback is activated with a menu; see navigating the auto-recording mode menu section on
page 38. In multi-function recording mode, instant playback is set in the custom 2 section of the
multi-function recording menu (p. 50). When used with voice memo, the audio recording will begin
after the image is played back.
If the center of the controller is pressed during
the instant playback, the displayed image will
immediately be saved and the playback can-
celed.
Controller
Delete this frame?
NoYe s
To Next Page
Loading...
Need help?
General
