90
SETUP MODE
Sharpness
Index playback format
Duration (Slide Show)
Repeat (Slide Show)
Index print
LCD monitor brightness
Auto-power-save period
Audio signals
File number memory
Normal
9 frames
5 seconds
No
No (Canceled)
3
1 minute
On
Off
Default Setting Page
Colour-saturation
Contrast Normal
Normal
60
60
60
75
76
76
79
86
87
87
88
SETTING THE DATE AND TIME
It is important to accurately set the clock. When a still image or a movie clip is recorded, the date and
time of the recording are saved with the image and are displayed during playback or can be read with
the DiMAGE Image Viewer Utility software included on the CD-ROM. The camera’s clock is also used
with date imprinting (p. 44).
When the Date/Time-set option is selected and entered, the
date/time screen will be displayed. The left/right keys of the con-
troller are used to select the item to be changed and the
up/down keys are used to change the value. From left to right,
the screen shows the year, month, day, hour, and minute. When
the date and time have been adjusted, set the clock by pressing
the center of the controller.
Enter
Setup
Date/Time set
2001 7 20 16 33:..
To Next Page
Loading...
Need help?
General
