Minolta EP1080 - Job Memory

Job Memory
All copying settings that can be made on the control panel can be stored in job
memory, except the Interrupt, Manual Staple, Energy Saving, Drum
Dehumidify Auxiliary Toner Replenishing, and Total Check Modes.
NOTE
Meter
Count
Toner
Drum
Dehumidify
Input
Auto
Size
Margin
Job
Memory
Cover
Manual
Staple
Sort
Sort &
Staple
Group
1
Mixed Orig. Det.
2
21
22
11
2in1
12
2in1
Book
1
Book
Orig. CopyFinishing
2
1139O2372A
1139O2372A
One copying job program that is frequently
used can be stored in memory and called up
later as necessary.
If you have stored a wrong job program or if you want to replace an old job
program with a new one, perform steps 1, 2, and 3.
To call up the job program from memory, press the Job Memory Select Key.
Drum
Dehumidify
Input
Job
Memory
Cover
1139O2582A
1139O2582A
Press the Job Memory Input Key.
Make the control panel settings
for the job to be stored in job
memory.
1
Job
Memory
1139O2572A
Press the Job Memory Select
Key.
This stores the copying job
program in job memory.
2
3
4. System Job Setting
Chapter 3
Making Copies
88