Chapter 6
Troubleshooting
This Chapter gives you instructions on how to troubleshoot copier
malfunctions.
1. When this Type of Copy is Produced
•
The Image is too light 152
•
The Image is too dark 152
•
The Copy is blurry 152
•
The Copy has lines 154
•
The Copy has dark specks or spots 154
•
The Edge of the Copy is dirty 154
•
The Image on the Copy is not aligned properly 154
2. The Copier is Not Activated
•
No Indicators on the Control Panel light up 156
•
Pressing The Start Key does not start the copy cycle 156
•
Control panel Keys do not respond 158
•
The Copier is not activated when the Power Switch is turned
ON 158
Chapter 6
Troubleshooting
151