Minolta EP1080 - Quick Reference for Indicator Lights

When the copier encounters any of the following conditions, a corresponding
warning indicator lights up. Some of the warning conditions entail inhibition
of the initiation of a copy cycle:
•
A control panel key or keys have been operated wrongly.
•
All conditions are not met to start a copy cycle.
•
The copier requires the operator’s intervention during a copy cycle.
The following table deals with the most important warning conditions. The
instructions given in the "Action" column are keyed to a particular page on
which you will find more detailed procedures to follow.
Warning Indicators
Indicator Copier State Action
Wait Indicator The copier is warming up.
No copy cycle can be initiated
while the Wait Indicator remains
lit.
Wait until the Wait Indicator goes
out and the Start Key turns to
green.
Add Toner
Indicator
Toner is running out.
(Warning only and a copy cycle
can still be initiated.)
Add toner by following the steps
given in "Add Toner Indicator."
➭
p. 110
Add Paper
Indicator
The paper has run out. Add paper by following the steps
given in "Add Paper Indicator."
➭
p. 112
1139O3270A
1139O3260A
1139O3910A
A3
A4
A4
B4
B5
FLS.
Inch
Auto
S
Auto
Lighter Darker
A
50%~200%
Auto
A4
Full Size
A3
Full Size Paper
123
456
789
0C
Start
Stop
Energy Saving
Interrupt
Panel Reset
B4 A3
B4 A4
A3 A4
A5
1139O1032A
1. Quick Reference for Indicator Lights
Chapter 5
When an Indicator Lights Up
108