Copy Cycle Start
Now you start the copy cycle for the copy job.
1139O2360A
Check the control panel to make
sure that you have set up your
copy job correctly.
Making sure it is lit up green,
press the Start Key.
The Start Key turns to orange
and the copy cycle is started.
Starting the Cycle
1
2
Stop
1139O2592A
1139O2592A
To stop a multi-copy cycle
halfway, press the Stop Key.
Stopping a Multi-Copy Cycle
In a multi-copy cycle, the
number on the Multi-Copy
Display is decreased by 1 each
time a copy is fed out of the
copier. The Display is reset to
the original setting as soon as
the multi-copy cycle is
completed.
The Start Key will soon turn to
green and the copier is brought
to a stop.
The Multi-Copy Display shows
the number of copies yet to be
made.
A3
A4
A4
B4
B5
FLS.
Inch
Auto
S
Auto
Lighter Darker
A
50%~200%
Auto
A4
Full Size
A3
Full Size Paper
123
456
789
0C
Start
Stop
Energy Saving
Interrupt
Panel Reset
B4 A3
B4 A4
A3 A4
A5
1139O1032A
1139O1032A
2. Basic Job Setting
Chapter 3
Making Copies
59
To Next Page
Loading...
