Symptom Check for: Action
Control panel Keys do not
respond.
Is the Interrupt Key LED lit
up?
Interrupt Key
The copier has is in the
interrupt mode.
Press the Interrupt Key to
cancel the interrupt mode.
➭
p. 61
The Copier is not activated
when the Power Switch is
turned ON.
Is the power cord plugged
into the power outlet?
Plug the power cord into the
power outlet.
Is the room circuit breaker
open?
Close the room circuit
breaker.
If these procedures do not correct the problem, contact your Tech. Rep.
Interrupt
1139O2602A
2. The Copier is Not Activated
Chapter 6
Troubleshooting
158