Toner
1139O2482A
1139O2482A
Press the Auxiliary Toner
Replenishing Key.
This causes the copier to initiate a
toner replenishing sequence, which
lasts a max. 1 min. 30 sec.
•
The copier cannot be set into the Auxiliary Toner Replenishing Mode while it
is warming up.
•
Do not turn the Power Switch OFF, or open the Front or Right Door during
the Auxiliary Toner Replenishing Mode.
NOTES
Meter
Count
Toner
Drum
Dehumidify
Input
Auto
Size
Margin
Job
Memory
Cover
Manual
Staple
Sort
Sort &
Staple
Group
1
Mixed Orig. Det.
2
21
22
11
2in1
12
2in1
Book
1
Book
Orig. CopyFinishing
2
1139O2372A
1139O2372A
The copier tends to exhaust the supply of
toner rapidly when making a number of
copies from an original with dark solid areas.
As a result, the image density of the copy
will become lighter. In such a case, you can
set the copier into the Auxiliary Toner
Replenishing Mode.
Original Copy
Copy Made After
Auxiliary Toner
Replenishing
Even if you continue making copies after the image density has become lighter,
the copier will gradually recover the normal image density. The Auxiliary Toner
Replenishing Mode can, however, be used to obtain the normal image density
more quickly.
1139O1232A
2. Auxiliary Toner Replenishing Mode
2. (Increasing the Image Density)
Chapter 4
Special Function
92
To Next Page
Loading...
