Precautions for Original Loading for Copies Stapled
Automatically or Manually
If you want to have your copy sets or stacks stapled automatically in the
Sort-and-Staple Mode or manually in the Manual Staple Mode, position the
originals crosswise. The originals should also be placed so that the stapling
position (marked with X) is positioned as shown.
Original Direction and Stapling Position
Correct:
Originals Loaded Crosswise
Copy Set/Stack Stapled at
Top Left Corner
Place the originals on the
Document Feed Tray so that
the stapling corner is at the
rear left side as shown.
1139O1160A
4. System Job Setting
Chapter 3
Making Copies
80
To Next Page
Loading...
