U-10 Paper port priority
•
Specifies the paper size or paper port selected automatically when the copier
has been set so that either one of the following conditions is selected in the
initial mode.
<Condition>
•
Auto Size Mode
•
Manual Mode
Setting
Value
Description
Initial
Setting
Setting
Value
Description
Initial
Setting
0 A3 lengthwise 12
8-1/2" × 14" lengthwise
1 B4 lengthwise 13
8-1/2" × 11" lengthwise
2 A4 lengthwise 14
5-1/2" × 8-1/2" lengthwise
3 B5 lengthwise 15
8-1/2" × 11" crosswise
4 A5 lengthwise 20 1st Drawer
5 FLS lengthwise 21 2nd Drawer
6
A4 crosswise
O
22
3rd Drawer
*Only when the
*copier is equipped
*with a Paper Feed
*Cabinet PF-201.
7 B5 crosswise
10 11" × 17" lengthwise
23
4th Drawer
*Only when the
*copier is equipped
*with a Paper Feed
*Cabinet PF-201.
11 11" × 14" lengthwise
U-12 AP/AS/Manual priority
•
Specifies the priority mode selected automatically in the initial mode.
Setting Value Description Initial Setting
0 Auto Paper (AP)
O
1 Auto Size (AS)
2 Manual
4. User’s Choice
Chapter 4
Special Function
96
To Next Page
Loading...
