123
456
789
1139O4870A
Press the appropriate Multi-Copy
Key or Keys to enter the new
setting.
See p. 95 for the setting values of
each choice code.
* The Multi-Copy Display shows
the new setting.
5
1139O2360A
Press the Start Key.
* This validates the new setting.
Repeat steps 2 through 6 to make
new settings of other functions.
6
Panel Reset
1139O4782A
1139O4782A
Press the Panel Reset Key.
* This allows the copier to leave
the User’s Choice Mode and the
control panel shows the initial
settings again.
7
If the choice code number on the Zoom Ratio Indicator or setting value on the
Multi-Copy Display starts brinking when the Start Key is pressed following
step 2 or 5, that entry is illegal. Check the correct number, press the Clear
Key, then re-enter the correct one.
NOTE
1139O3870A
Zoom Ratio Indicator
1139O3870A
1139O3890A
Multi-Copy Display
1139O3890A
1139O3850A
Zoom Ratio Indicator
1139O3850A
1139O3860A
Multi-Copy Display
1139O3860A
4. User’s Choice
Chapter 4
Special Function
105
To Next Page
Loading...
