1139O1420A
Ensuring that the arrow
on the Toner Bottle faces
towards you, insert the Bottle
into position.
Insert the Bottle all the way
into the copier until the
marking on the Bottle is
aligned with the marking
on the Toner Bottle Holder.
NOTE
1139O1400A
Swing close the Toner Bottle
Holder and close the Front Door.
5
1139O1390A
With the Seal on the Toner
Bottle facing ups slowly peel off
the Seal as illustrated.
4
6
•
Try to replace the Toner Bottle with a new one as soon as possible once the
Add Toner Indicator has lit up. If you continue making copies without
changing the Toner Bottle, a lighter image could result.
•
Use ONLY MT Toner 101B for the EP1080 copier. Use of toner for any other
copier model could result in image trouble.
NOTES
Use the Auxiliary Toner Replenishing Mode if the image is light immediately
after the Toner Bottle has been replaced with a new one.
➭
p. 92
Auxiliary Toner Replenishing Mode
Be careful, some toner may
puff out from the bottle.
NOTE
2. Detailed Instructions for Indicator Lights
Chapter 5
When an Indicator Lights Up
111
To Next Page
Loading...
