Action
Change the setting of the User’s Choice Mode U-13, Priority Auto Exposure Level.
➭
p. 97
Cancel the Auto Exposure Mode to select the Manual Exposure Mode and adjust the
exposure level to obtain a darker image.
➭
p. 47
Press the Exposure Control Key (Darker) as necessary to obtain a darker image.
➭
p. 47
The copier needs more toner.
Execute Auxiliary Toner Replenishing as many times as is required to obtain the desired
image density.
➭
p. 92
The copier needs more toner.
Execute Auxiliary Toner Replenishing as many times as is required to obtain the desired
image density.
➭
p. 92
Replace the Toner Bottle with a new one.
➭
p. 110
Replace the paper.
➭
p. 112
Change the setting of the User’s Choice Mode U-13, Priority Auto Exposure Level.
➭
p. 97
Cancel the Auto Exposure Mode to select the Manual Exposure Mode and adjust the
exposure level to obtain a lighter image.
➭
p. 47
Press the Exposure Control Key (Lighter) as necessary to obtain a lighter image.
➭
p. 47
Wipe clean the Original Glass with a soft dry cloth.
➭
p. 174
Place the original in position so that it is held tightly against the Original Glass.
➭
p. 38
Replace the paper.
➭
p. 112
1. When this Type of Copy is Produced
Chapter 6
Troubleshooting
153