▲
▲
Conditions for Combined Functions
A to F: The settings can be made only when the copier is equipped with the
following options.
A : Duplex Unit AD-3
B : Duplexing Document Feeder AFR-7
C : Automatic Document Feeder AF-3
D : 10-Bin Sorter S-104
E : Staple Sorter ST-101
F : Multi Bypass Table MB-1
G : The Cover mode cannot be selected when any of the following settings has
been made for Org. Copy. If any of them is selected after the Cover Mode
has been selected, it cancels the Cover Mode.
• 1 2 • Book 1
• 1 2 [2in1] • Book 2
H : You cannot select Book 1 if you have previously loaded an original into the
AF-3/AFR-7. If you load an original into the AF-3/AFR-7 after you have
selected Book 1, the copier cancels Book 1 and selects 1 1.
I : The Sort-and-Staple mode can be used only when you load two or more
originals in the AF-3/AFR-7.
J : The Cover mode can be used only when the AF-3/AFR-7 and Multi Bypass
Table MB-1 are used.
K : The Interrupt mode takes precedence. The Interrupt mode cannot be used if
1 2, 2 2, 1 2[2in1], or Book 2 has been set in the copying-job program
previously called up.
L : A zoom ratio or a copying-job program set in the Interrupt mode cannot be
stored in memory.
M : Book 1 or Book 2 can be combined with the Sort-and-Staple mode, but no
stapling action takes place. (The copier performs only book copying and
sorting of copies, but not stapling.)
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
2. Function Combination Matrix
Chapter 8
Miscellaneous
179
To Next Page
Loading...
