Minolta EP1080 - Page 39

•
Call-Tech.-Rep. Indicator
Indicates that the copier has developed a
malfunction.
When a malfunction occurs, the corresponding
malfunction code is shown across the Zoom Ratio
Indicator and Multi-Copy Display.
➭
pp. 109, 149
2
Warning Information Display
•
Wait Indicator
Indicates that the copier is warming up. No copy
cycle can be initiated as long as this Indicator
stays lit. Wait until it goes out.
➭
pp. 29, 108
•
Add Toner Indicator
Indicates that the Toner Cartridge is running out
of toner. Replace the Toner Cartridge as soon as
possible.
➭
pp. 108, 110
•
Add Staple Indicator
Indicates that the Staple Cartridge is running out
of staples. Replace the Staple Cartridge as soon as
possible.
➭
pp. 109, 116
•
I.U. Service Life Indicator
Indicates that the Imaging Unit needs
replacement. Call your Tech. Rep. immediately.
➭
pp. 109, 120
•
Remove Copies Indicator
Indicates that there is a copy or copies left in the
Sorter Bins. Remove copies from all Bins.
3
Exposure Information Display
•
Auto Exposure Indicator
Indicates that the copier is now in the Auto
Exposure Mode.
➭
p. 46
•
Exposure Level Indicator
Shows the exposure setting level in the Manual
Exposure Mode.
➭
p. 46
The center LED is normally lit up.
Auto
Lighter Darker
1139O4682A
Lighter Darker
1139O4692A
1139O3250A
1139O3250A
1139O3400A
1139O3290A
1139O3280A
1139O3260A
1139O3270A
3. Control Panel Keys and Indicators
Chapter 2
First Things to Know about EP1080
27