•
The copier has been factory-set to select the Auto Paper Mode in the initial
mode. This priority mode can be changed to the Auto Size Mode or Manual
Mode by using the User’s Choice.
NOTES
Initial mode
➭
p. 32
User’s Choice
➭
p. 96
Auto
A4
Full Size
A3
B4 A3
B4 A4
A3 A4
1139O8022A
•
The Auto Size Mode Indicator blinks
under any of the following
conditions:
◆
A good magnification ratio is
below 50% or over 200% in the
Auto Size Mode.
When this happens, cancel the Auto
Size Mode and use the Manual Mode.
2. Basic Job Setting
Chapter 3
Making Copies
52
To Next Page
Loading...
