4
Auxiliary Functions
4-10 EP1085
U-20 Auto Panel Reset ON/OFF
Selects whether to activate the Auto Panel Reset function 60 seconds
after a copy cycle has been completed or a control panel key has been
pressed.
If “0” is selected:
The control panel settings remain valid even after 60 seconds.
If “1” is selected:
The control panel settings are canceled and the copier is reset into the
default mode after 30 seconds. (Auto Panel Reset)
If “2” is selected:
The control panel settings are canceled and the copier is reset into the
default mode after 60 seconds. (Auto Panel Reset)
U-21 Energy Saver ON Timing
Select whether or not to set the copier into the Energy Saver mode after
the lapse of a given period of time after a copy cycle has been completed
or a key on the control panel has been operated.
Theperiodoftimecanfallwithintherangeof1to98min.,orbesetto240
min.
The initial setting is 15 min.
Setting Description Initial Setting
0 Auto Panel Reset is not activated.
1 Auto Panel Reset is activated (after 30 sec.)
2 Auto Panel Reset is activated (after 60 sec.)
Setting Description Initial Setting
1 Enabled : 1 min.
2 Enabled : 2 min.
3 Enabled : 3 min.
:
:
:
:
98 Enabled : 98 min.
99 Enabled : 240 min.
To Next Page
Loading...
