Installation and Programming Manual
Mircom Technologies Inc All Rights Reserved LT-1034 Rev.1
Page 44 of 54
As long as the NMC is NOT in alarm, then the laptop can be used to initiate the transfer of data. The NMC will go
into trouble mode but the piezo will not sound.
See FIRE-LINKload Help document for further available functions from this linked program.
NOTE: If the JOB is not new, then it is recommended that the ‘GET JOB’ upload be performed before adding
any new data before initiating the ‘SEND JOB’ download.
To Next Page
Loading...
