Need help?Do you have a question about the Mircom flexnet and is the answer not in the manual?
General| Type | Fire Alarm Control Panel |
|---|---|
| Expandability | Expandable with modules |
| System Type | Addressable |
| Communication Protocol | FlexNet |
| Operating Voltage | 120VAC, 60Hz |
| Battery Backup | Yes |
| Network Capability | Yes |
| Certifications | UL, ULC, FM |
Description of modules that provide network control capabilities.
Modules for integrated audio and telephone system functions.
Information on remote display and control units.
Configuration settings and connector functions for the main fire alarm module.
Connectors and jumpers for the FNC-2000 network controller module.
Cable connections for the FOM-2000-SP fiber optic network module.
Jumper settings for the PR-300 polarity reversal and city tie module.
Power, RS-485, DIP switches, and jumper settings for the ALCN-792M/D module.
Wiring diagrams for analog loops in Class B and Style 7 configurations.
Wiring diagrams for analog loops in Style 6 (Class A) configuration.
Wiring diagrams for the ALCN-792M quad loop adder module in Class B.
Wiring details for the DM-1008A hardwire detection module.
Wiring details for the SGM-1004A hardwire signal module.
Terminal connections for the RM-1008A hardwire relay module.
Wiring instructions for the PR-300 polarity reversal and city tie module.
Telephone line wiring diagram for the UDACT-300A main board.
Description of different types of initiating circuits and their functions.
Description of different types of indicating circuits and their functions.
Methods for managing system configurations.
Diagrams illustrating typical system configurations with audio integration.
Example system layouts showing audio and non-audio nodes.
Detailed breakdown of components within the integrated fire/audio cabinet.
Instructions for the physical installation of the integrated fire/audio cabinet.
Overview and dimensions of the BBX-FXMNS enclosure for mass notification.
Installation procedures for expansion audio cabinets.
Module placement within the QBB-5001/R expansion audio cabinet.
Wiring details for the QAA-5230-70/25 amplifier.
Wiring details for the QAA-5230S-70/25 amplifier.
Wiring details for the QAA-5415-70 and QAA-5415-25 amplifiers.
Wiring details for the QAA-5160-70/25 amplifier.
Information on installing and configuring a backup amplifier.
Step-by-step instructions for installing the QBB-5001/R amplifier.
Process for configuring the FleX-Net TM system's audio settings.
Description and mounting locations of the ANC-5000 module.
Wiring diagram for the ANC-5000 audio network controller module.
Diagram illustrating the audio paging bus connections between ANC-5000 modules.
Description and controls of the QMP-5101N paging control module.
Description of the TNC-5000 telephone network controller module.
Diagram illustrating the typical setup of an addressable telephone system.
Wiring diagrams for the TNC-5000 telephone bus.
Specific wiring instructions for telephone zones using MIX-M500FP(A) modules.
Description of the QMT-5302N master firefighters' telephone.
Description of the QAZT-5302/DS telephone selector panel.
Specifications for FX-2003-12N/DS and FX-2000ND main chassis.
Wiring scheme for addressable supervised output modules per UL 864 Rev. 9.
To Next Page
