Mircom flexnet User Manual

Paging Operation
110
QAZT-5302/DS Zoned Paging Selector Panel
Each QAZT-5302/DS annunciates and controls up to
24 audio zones. There is one button and two LEDs per
zone. The lower amber LED indicates Zone trouble.
The upper green LED indicates whether that zone is
selected for voice paging via the master microphone.
Press the button to turn the selection for voice paging
for that zone ON and OFF.
Paging Operation
This section describes the controls and indicators on the QMP-5101N and QMP-5101NV Master Paging and QAZT-
5302/DS Paging Selector Modules.
QMP-5101N/QMP-5101NV LEDs
Warden Page
Illuminates steady green to indicate that the Warden Page function is active.
All Call
Illuminates steady green to indicate that the All-Call function is active.
Common Trouble LED
Flashes amber to indicate any QX-5000 trouble.
Pre-Tone Active LED
Steady green when paging and warden paging
Amplifier Trouble LED
Indicates any amplifier internal trouble.
Mic Trouble LED
Flashes amber to indicate a microphone trouble.
Page to Evac LED
Illuminates steady green when the Page to Evac pushbutton is active.
Page to Alert LED
Illuminates steady green when the Page to Alert pushbutton is active.
AC ON LED
This green LED illuminates steadily to Indicate that AC power is present.
Page Ready LED
Illuminates steady green when the push-to-talk (PTT) on the microphone is depressed (active).
Lamp Test LED
This amber LED illuminates steadily to indicate that the Lamp Test has been activated.
PAGE
#1
PAGE
#2
PAGE
#4
PAGE
#3
PAGE
#5
PAGE
#6
PAGE
#8
PAGE
#7
PAGE
#9
PAGE
#10
PAGE
#12
PAGE
#11
PAGE
#17
PAGE
#18
PAGE
#20
PAGE
#19
PAGE
#13
PAGE
#14
PAGE
#16
PAGE
#15
PAGE
#21
PAGE
#22
PAGE
#24
PAGE
#23

Mircom flexnet Specifications

General

Brand	Mircom
Model	flexnet
Category	Security System
Language	English