Mircom flexnet User Manual

Mircom
24
Display and Adder Modules Mounting Locations
FX-2003-12N Compact Main Chassis
Mounts in the BBX-1024 Enclosure and supports three adder modules.
FX-2017-12N Mid-size Main Chassis
Mounts in the BBX-1072A Enclosure, and supports three display modules and 17 adder modules.
Exterior View Interior View
Exterior View Interior View
ALARM
QUEUE
SUPV.
QUEUE
TROUBLE
QUEUE
MONITOR
QUEUE
A.C. ON
CPU FAULT
GND FAULT
SIGNAL
SILENCE
GENERAL
ALARM
ACKNOW-
LEDGE
FIRE
DRILL
SYSTEM
RESET
LAMP
TEST
ENTER
MENU
CANCEL
INFO
LED 0
LED 1
LED 2
LED 3
LED 4
LED 5
LED 6
LED 7
LED 8
LED 9
LED 10
LED 11
LED 12
LED 13
LED 14
LED 15
CONFIGURABLE
SWITCH/LED 3
CONFIGURABLE
SWITCH/LED 7
Mircom FX-2000N
Fire Alarm Control Panel
Normal Condition
December 31, 2009
AC LINE
CIRCUIT
BREAKER
FX-2000 Main Board
123
Slot 3 is reserved
for PR-300 or
UDACT-300A. If
not required, this
slot can be used to
mount any of the
adder modules.
The recommended
mounting position is 2
for the FNC-2000. The
FOM-2000-SP board, if
used, is mounted over
the FNC-2000 board.
FX-2000N Main Board
Cutout to mount
display module
Cutout to mount
display module
Cutout to mount
display module
AC LINE
CIRCUIT
BREAKER
ALARM
QUEUE
SUPV.
QUEUE
TROUBLE
QUEUE
MONITOR
QUEUE
A.C. ON
CPU FAULT
GND FAULT
SIGNAL
SILENCE
GENERAL
ALARM
ACKNOW-
LEDGE
FIRE
DRILL
SYSTEM
RESET
LAMP
TEST
ENTER
MENU
CANCEL
INFO
LED 0
LED 1
LED 2
LED 3
LED 4
LED 5
LED 6
LED 7
LED 8
LED 9
LED 10
LED 11
LED 12
LED 13
LED 14
LED 15
CONFIGURABLE
SWITCH/LED 3
CONFIGURABLE
SWITCH/LED 7
Mircom FX-2000N
Fire Alarm Control Panel
Normal Condition
December 31, 2009
1
23
45
67
89101112
1314151617
FX-2000 Main Board
Slot 3 is reserved for PR-300 or UDACT-
300A. If not required, this slot can be used
to mount any of the adder modules.
The recommended mounting position is 2 for
the FNC-2000. The FOM-2000-SP board, if
used, is mounted over the FNC-2000 board.
FX-2000N Main Board

Mircom flexnet Specifications

General

Brand	Mircom
Model	flexnet
Category	Security System
Language	English