Need help?Do you have a question about the Mircom QX-mini and is the answer not in the manual?
General| Brand | Mircom |
|---|---|
| Model | QX-mini |
| Category | Security System |
| Language | English |
Introduces the QX-mini Emergency and Fire Alarm Audio System.
Details the various models and parts of the QX-mini system.
Lists fire alarm control panels compatible with the QX-mini system.
Highlights the key features and capabilities of the QX-mini system.
Provides general notes and wiring style information for the QX-mini system.
Details the various models and parts of the QX-mini system.
Lists optional accessories available for the QX-mini system.
Provides physical dimensions and mounting hole specifications for the QX-mini.
Guides for surface and flush mounting the QX-mini and related enclosures.
Details how to connect AC power to the QX-mini main board.
Guides on connecting battery power for the QX-mini and QX-mini-BP.
Tables for input, NAC, and speaker circuit wiring specifications.
Details wiring for SLC, FACP, QX-mini, relays, and microphone connections.
Explains how to connect speakers to the QAD-30 amplifier module.
Details connecting speakers to the QAS-2X8 audio zone splitter.
Describes configuration and wiring for a backup amplifier setup.
Guides on connecting AC and battery power supplies to the QX-mini.
Outlines UL requirements for power-limited and non-power-limited wiring.
Overview of LEDs and controls on the QX-mini, main board, and amplifier.
Details the functions of LEDs and buttons on the QX-mini main display panel.
Explains the meaning of LEDs on the QX-mini main board for troubleshooting.
Describes the LEDs on the QAD-30 amplifier module for troubleshooting.
Explains the LEDs and control on the QX-mini-RM remote microphone.
Details indicators and controls on the QX-mini-LOC.
Defines circuit types used for communication between devices in the system.
Explains how the QX-mini uses FACPs as initiating device circuits.
Describes types of NAC circuits for audible and visual notification appliances.
Explains internal and external synchronization modes for NAC circuits.
Details single-stage and two-stage evacuation codes used in NAC circuits.
Covers playing pre-recorded and user-supplied audio messages.
Guides on using microphones and consoles for paging zones.
Explains the priority order for audio channels and microphone control.
Provides procedures for testing the QX-mini and QX-mini-LOC system functionality.
Outlines testing procedures for the QX-mini-RM remote microphone.
Illustrates various ways the QX-mini system can be implemented.
Details integrating the QX-mini with conventional fire alarm systems.
Explains interfacing the QX-mini with addressable fire alarm control panels via SLC.
Identifies DIP switch locations for configuring QX-mini addresses.
Guides on setting DIP switches for panel addresses and system configuration.
Explains setting RS-485 addresses for remote microphones using rotary switches.
Provides recommended steps for powering up and checking the QX-mini system.
Covers troubleshooting circuit, battery, ground faults, and general troubles using LEDs and indicators.
Lists general, NAC, power supply, electrical ratings, battery, and compliance specs.
Details specifications for the QX-mini-RM, QAD-30, and QAS-2X8 components.
Lists ULI compatible synchronized strobe devices and their specifications.
Details amplifier compatibility and recommended signal settings for UL applications.
Lists compatible speaker models from various manufacturers with their specifications.
Covers critical warnings, installation notes, and user advisories for safe and effective system use.
To Next Page
