10
Introduction
1.1 The QX-mini Emergency and Fire Alarm Audio System
The QX-mini operates either as a mass notification audio system or as part of a fire alarm
system. Conventional fire alarm systems control the QX-mini with relays. Any of the Mircom/
Secutron panels listed in Table 2 can control the QX-mini.
Mircom’s QX-mini is an emergency and fire alarm audio system designed to provide
notification for small to medium applications. The QX-mini supplies 30W for audio output and
5A for NAC. The optional QAD-30 increases audio output to 60W.
Optional QX-mini-BP Booster Panels provide support for a distributed system. These Booster
Panels have the same output as the QX-mini but do not have microphones or user interface
panels. Up to five Booster Panels can be connected to a QX-mini.
For a list of QX-mini models, components, and accessories, see Table 1.
1.1.1 QX-mini Models and Components
Table 1 QX-mini Models, Components, and Accessories
Model Description
QX-mini QX-mini Audio System Master Panel with main display, blank plate,
microphone, backbox, and front door
QX-mini-BP QX-mini Audio System Booster Panel with deadfront and backbox
QX-mini-RM Remote Microphone for the QX-mini Audio System
Note: Not for use in Canada
QX-mini-LOC Local Operating Console for QX-mini with main display, blank
plate, microphone, deadfront, backbox, and front door
Note: Not for use in Canada
QAD-30 30W Amplifier Module
QAS-2X8 QX-mini Audio Zone Splitter
QAZT-5302DS 24 zone controller
Note: For more accessories, see section 2.1 QX-mini Components on page 14.
To Next Page
Loading...
