104
Operation
6.8 Audio Priorities
The QX-mini prioritizes audio channels in the following order:
1. QX-mini master microphone
2. QX-mini-RM remote microphone or QX-mini-LOC
Remote microphone priorities are configured either as first-come-first-served or by
remote microphone addresses. For example, when a higher priority interface is activated
then all control is reset and is given to the higher priority interface, thus blocking all lower
priority interfaces. In all cases, the QX-mini master microphone maintains highest priority
and its control will pre-empt any activity on the QX-mini-RMs and QX-mini-LOCs. For
information on setting remote microphone priorities, see SW2 address on QX-mini-RM
AND QX-mini-LOC board.
3. Manual activation.
4. Automatic activation.
Note: QX-mini-RM AND QX-mini-LOC addresses MUST be sequential and without
numerical gaps.
To Next Page
Loading...
