Mircom flexnet User Manual

FleX-Net
TM
Installation and Operation Manual
75
System Components for the Integrated Fire/Audio Cabinet
Network Fire Alarm
Network Controller Modules
Model Description
FX-2000ND
12 Amp Large Main Chassis. This large main
chassis comes complete with one Analog Loop
Controller (99 Analog Sensors and 99 Addressable
Modules), 4 Class A/B (Style Z/Y) Indicating Circuits
(1.7 Amp each), a 4 line by 20 character back-lit
LCD display, 16 zone LED annunciator and a 12
ampere power supply which charges 17-65 AH
batteries. The Integrated Fire and Audio system
supports the FNC-2000 Network Controller Module,
the ANC-5000 Audio Network Controller Module
and the TNC-5000 Telephone Network Controller
Module. This chassis mounts in the BBX-2000
backbox.
FX-2000NDS Same as above. Different front panel appearance.
Model Description
FNC-2000
Provides network capability for the FX-2000N
Fire Alarm panel. One module is required per
one network node panel. The FNC-2000 Fire
Network Controller module is mounted in
position 2 over the FX-2000ND main board.
ANC-5000
Audio Network Controller module. The ANC-
5000 Audio Network Controller module is
mounted on a metal plate (which is packaged
with the FX-2000ND) and then the plate is
mounted into BBX-2000 backbox in position 1
of the QMB-5000N Card Cage.
TNC-5000
Telephone Network Controller module. The
TNC-5000 Telephone Network Controller
module is mounted below the ANC-5000 Audio
Network Controller module and both are
mounted on a metal plate and then the plate is
mounted into the BBX-2000 backbox in
position 1 of the QMB-5000N Card Cage.

Mircom flexnet Specifications

General

Brand	Mircom
Model	flexnet
Category	Security System
Language	English