Installation and Programming Manual
Mircom Technologies Inc All Rights Reserved LT-1034 Rev.1
Page 50 of 54
10.0 APPENDIX A
Error Messages
Sys Error: 1 – Indicates a problem with the Network Controller on the NMC main board
Sys Error: 2 – Indicates a problem with the system EEPROM on the NMC Main Controller
Sys Error: 3 – Indicates a problem with Detection Zone 1 on the NMC Main Controller
Sys Error: 4 – Indicates a problem with Detection Zone 2 on the NMC Main Controller
To Next Page
Loading...
