22 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
Configuration
To enable the guard phone
1. Press the arrow key to scroll to “Guard Phone” and press the telephone
(enter) key. The Guard Phone selection appears.
2. Press the up arrow key to see all 3 lines as shown above.
3. The default is no guard phone. Use the * key to select the Guard Phone if
required and press the telephone (enter) key to accept.
4. Press info key to return to previous menu.
2.7.11 Calling Schedule
The Calling Schedule function lets you define when calls to residents are
allowed. For a description on how to define schedules see paragraph 2.9.
To set the calling schedule
1. Press the arrow key to scroll to “Calling Sch” and press the telephone
(enter) key. The Calling Schedule selection appears.
2. Press the up and down arrow keys to scroll to one of the schedules shown
above. There are two default schedules to choose; ALWAYS and
NEVER. The other calling schedules are defined by the administrator.
The default is “Always”. See more information about schedules see
paragraph 2.9.
Guard Phone
[ ] Guard Phone
[ x ] No Guard Phone
Calling Sch
0 Always
1 Never
2 Weekdays
3 Weekend
4 Evenings
5 Holidays
To Next Page
Loading...
