Mircom TX3 Series - 2.3 Heater and 2.4 Kiosk Installation

Configuration
Version 2.7 TX3 Telephone Access System Programming Manual 29
LT-979 Copyright 2018
2. Press the up and down arrow keys to scroll through the numbers. The
range is 1-15 and the default is 11.
3. Press the telephone (enter) key to accept.
4. Press info key to return to previous menu.
2.7.23 MIC Volume
The “Microphone Volume” function lets you adjust the sensitivity of the Entry
Panel microphone volume.
To set the “Microphone Volume” function
1. Press the arrow key to scroll to “MIC volume” and press the telephone
(enter) key. The “MIC volume” entry appears.
2. Press the up and down arrow keys to scroll through the numbers. The
range is 1-15 and the default is 5.
3. Press the telephone (enter) key to accept.
4. Press info key to return to previous menu.
2.7.24 Select Font Option
The Select Font Option function lets you select the system font and is only
available on the 8-line display.
Note: The Select Font Option is only available for 8 line display Entry
Panels.
MIC volume
[ 005 ]