Mircom TX3 Series - Page 30

30 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
Configuration
To set the “Select Font Option” function
1. Press the arrow key to scroll to “Select Font Option” and press the
telephone (enter) key. The “Select Font Option” selection appears.
2. Press the up and down arrow keys to scroll to a selection. The default is
‘Fixed system’.
3. Use the “#” key to make a selection.
4. Press the telephone (enter) key to accept.
5. Press info key to return to previous menu.
2.7.25 Voice Help Option
The “Voice Help Option” function lets you turn on or off Voice Help.
To set the “Voice Help Option” function
1. Press the arrow key to scroll to “Voice Help Option” and press the
telephone (enter) key. The “Voice Help Option” selection appears.
2. Press the up and down arrow keys to scroll to the ‘Active’ or ‘Not Active’
selection. The default is ‘Active’.
3. Use the “#” key to make a selection.
4. Press the telephone (enter) key to accept.
5. Press info key to return to previous menu.
Select Font
[ x ] Fixed system
[ ] Lucida console
[ ] Courier bold
[ ] Courier reg
[ ] Raize
[ ] Large Font
Voice help opt
[ x ] Active
[ ] Not Active