Mircom TX3 Series - Page 31

Configuration
Version 2.7 TX3 Telephone Access System Programming Manual 31
LT-979 Copyright 2018
2.7.26 Auto Unlock Schedule
The Auto Unlock Schedule function lets you keep the door unlocked for the
duration of the selected schedule. The door locks when the schedule ends.
To set the Auto Unlock Schedule
1. Press the arrow key to scroll to “Auto Unlock Sch” and press the telephone
(enter) key. The Auto Unlock Schedule selection appears.
2. Press the up and down arrow keys to scroll through all of the available
schedules as shown above. The factory default is “Never”.
3. Use the up and down arrow keys to select the schedule and press the
telephone (enter) key to accept.
4. Press info key to return to previous menu.
2.7.27 DTMF Sensitivity
The DTMF sensitivity feature allows the resident to change how sensitive the
TX3 unit is to receiving DTMF signals. DTMF sensitivity can be set from 1 to 8.
A sensitivity of 1 indicates the lowest sensitivity while 8 is the highest sensitivity.
The default sensitivity is 5.
To define the DTMF sensitivity
1. Press the arrow key to scroll to “DTMF Sensitivity” and press the
telephone key. The DTMF Sensitivity selection appears.
2. Use the up or down key to move to select the sensitivity level.
3. Press the telephone (enter) key to accept.
4. Press the info key to return to the previous menu.
Unlock Sch
0 Always
1 Never
2 Weekdays
3 Weekend
4 Evenings
5 Holidays
- DTMF Sensitivity -
[ 005 ]